Starting lm_sensors: loading module it87 Note: there is no driver for AMD K10 thermal sensors yet.ĭo you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): * Chip `AMD K10 thermal sensors' (confidence: 9) Now follows a summary of the probes I have just done.Ĭhip `ITE IT8712F Super IO Sensors' (confidence: 9) Next adapter: SMBus nForce2 adapter at 0700 (i2c-1) (confidence 8, not a hardware monitoring chip) Next adapter: SMBus nForce2 adapter at 0600 (i2c-0)ĭo you want to scan it? (YES/no/selectively): conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. Sorry, no supported PCI bus adapters found. Reasonably well on most systems, it has been reported to cause troubleĭo you want to probe the I2C/SMBus adapters now? (YES/no):įound unknown SMBus adapter 10de:0752 at 0000:00:01.1. This is the most risky part, and while it works Lastly, we can probe the I2C/SMBus adapters for connected hardware Probing for `National Semiconductor LM79' at 0x290. Probing for `National Semiconductor LM78' at 0x290. ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): YES Yes, you do have ISA I/O ports even if you do not have any We have to write to arbitrary I/O ports to probe them. Some hardware monitoring chips are accessible through the ISA I/O ports. We have to read from arbitrary I/O ports to probe for such interfaces. Through which system health data may be retrieved, amongst other things. Some systems (mainly servers) implement IPMI, a set of common interfaces Noįound `ITE IT8712F Super IO Sensors' Success! This is usually safe.ĭo you want to scan for Super I/O sensors? (YES/no): Some Super I/O chips contain embedded sensors. Some south bridges, CPUs or memory controllers contain embedded sensors.ĭo you want to scan for them? This is totally safe. It is generally safeĪnd recommended to accept the default answers to all questions, To load to use lm_sensors most effectively. This program will help you determine which kernel modules you need # System: System manufacturer System Product Name sensors-detect comes with lm_sensors, so we make sure, the latest version of lm_sensors is installed They not only reduce the CPU frequency and the core voltage, the mainboard also detects an idling, cool CPU and therefore reduces the fanspeed.īut what if the fanspeed is still to high while the CPU is doing nothing? Or maybe the fan doesn’t spin fast enough while your CPU is burning in a very small case.īefore you can read out any temperature values and change the fanspeed accordingly, you have to your operating system which sensors you are actually using.įortunately, there is a small program that does the job for you. Modern CPU throttling technology like Intel’s SpeedStep or AMD’s Cool’n’Quiet are quite fancy.
0 kommentar(er)
